We create ventilation in the toilet in the country
Let's talk about the significant moments of the correct country toilet, the most important thing in which it is the most efficient ventilation. As you know, a toilet on the territory of a private house is not a luxury, but a direct necessity. During the construction of a toilet on your site outside the city, do not miss the moment when it is necessary to ventilate the cesspool and the toilet cubicle itself. True, if you nevertheless forgot about it, this oversight can be corrected by making several holes on your own, providing at least minimal ventilation to the country toilet.
Country toilet: ventilation in the pit
In a house with an autonomous sewage system, as a rule, both the ventilation of the cesspool and the ventilation of the septic tank should be arranged. Moreover, the ventilation branch pipe should be inserted into the storage device so that its lower end is 20-30 cm above its filling level. If the pit ventilation issue is resolved, an unpleasant odor can still accumulate in the cabin due to the fact that the room is not airtight, the lid does not close tightly or for other reasons. This often happens if the toilet is not professionally built. To get rid of the bad smell, there is a fallback ventilation option made directly in the toilet cubicle.
Country toilet: ventilation in the cabin
Ventilation of the toilet in the country will require plastic sewer pipes about three meters long and 110 mm in diameter, a connecting angle of 90 degrees, a rain umbrella, a ventilation grill and clamps.A hole in the wall of the toilet of a sufficiently large diameter (120-130 mm) is drilled with a metal cutting crown, then a place for the hood is marked in the upper part of the cabin, the crown is attached to a drill and a second hole is drilled.
The pipes must be connected with a transition angle. The structure is inserted into the hole, and everything unnecessary from a short piece of pipe is cut off. Further, the assembled ventilation structure of the toilet in the country house is attached to the wall with connecting clamps, an umbrella is put on to protect it from precipitation. You can control the verticality of the resulting ventilation system for a country toilet using a building level. To complete the work, two self-tapping screws are screwed to install the ventilation grill inside the room. If there is such a problem as a gap between the pipe and the wall, then fill it with polyurethane foam or seal it with sealant.
